Transparent press-to-close pouch 110x150mm

The 110 × 150 mm transparent press-to-close pouch offers a solution for visible, resealable packaging of smaller product units. The buyer can see the contents through the pouch, and the press-to-close closure makes it easier to use the product in several portions. The main considerations for this version are mechanical protection, orderly presentation and convenient handling. We choose it for contents whose protection requirements are compatible with a moderate aroma barrier property.

Compact size, actual internal space

The 110 × 150 mm format must be assessed together with the shape of the product and the required portion. In addition to the outer size, the seal edges and the position of the press-to-close closure also count, so the pouch cannot be filled to its full height. Sufficient room is needed at the top for easy opening, resealing and the chosen initial seal. A trial fill shows whether the desired quantity can be inserted easily, whether the pack remains easy to hold and whether the contents stretch the edges. A pouch of the same size can hold different quantities of products with different shapes.

Press-to-close closure for handling during use

Resealability is a tangible advantage when the contents of the pack are not all used at once. The pressable profile of the press-to-close closure allows the opening to be closed again and again. During use, the closure line must be kept clean and pressed together across its full width. The remaining contents must fit below the closure so that the pouch can be closed without force. Resealing helps handling; the storage conditions after opening should be defined with instructions for use that suit the product.

Clear pillow format

The pouch sealed on two or three sides has no gusset, so we design it for products displayed lying flat. Through the transparent surface, the contents and the remaining quantity can be seen. The appearance of the pack is shaped by the arrangement of the contents and the artwork together, so the position of the label or print should be checked in the filled state. During transport, in addition to the film and the side seals, the task of the outer packaging also counts. For hard or protruding parts, sizing together with the product helps assess the local load and the required internal space.

Sealing and your own branding

For your own packing, an impulse sealer can also be used, with settings suited to the selected pouch and the packing operation. The initial seal after filling and the press-to-close closure used by the buyer must be designed in coordination with each other. The pouch can also be made with your own logo and artwork. On a small surface, the order of information is particularly important: the product name should be easy to recognise, and the area intended to show the contents should remain clear. We position the lettering appropriately in relation to the sealing and opening areas.

This small transparent press-to-close pouch is best chosen based on the desired portion and how the buyer uses it. With a product sample, fit, ease of use of the closure and appearance can be checked, so the final packaging can be well thought out for both daily filling and use after opening.