The machine is suitable for packaging larger products as well as products of the same material. Its recessed chamber simplifies the packaging of pouches containing liquids.
If you want to buy pouches for it, you can see the vacuum pouches here.
General characteristics
Vacuum packaging machine in table-top design
Acid-resistant cover
An acid-resistant deep-drawn vacuum chamber ensures optimal hygiene
Transparent lid (except BOXER 42 XL Bi-active)
Cordless welding heads that can be easily removed from the vacuum chamber
The depth of the vacuum chamber can be adjusted with space-filling trays
Packaging functions
Vacuum: optimum final vacuum 99.99% (0.1Mbar)
Gas injection: the injected gas protects the product from mechanical damage and significantly increases its shelf life
Soft-air: controlled ventilation, ie slow vacuuming and air release, which protects soft products from compression
Welding options
Double welding 2 x 3.5 mm convex welding wire ensures moisture removal and provides double protection
Welding / cutting sealing 1 x 3.5 mm convex welding wire + 1 x 1.1 mm diameter circular wire.
Delayed cutting 1 x 3.5 mm convex welding wire + 1 x 1.1 mm diameter circular wire. The machine can be set to keep the outer round wire under heating, so the shrink vacuum pouches become manageable.
Wide welding 1 x 8 mm flat welding wire
Bi-active sealing 1 x 5 mm flat welding wire in the vacuum chamber as well as on the top. This also makes it possible to weld vacuum pouches thicker than 200 microns or aluminum triplex pouches. (BOXER 42 XL Bi-active model only)
Control functions
Digital control: time control / automatic programming / 10 program options
Sensor control: by adjusting the vacuum and gas injection pressure an accurate and consistent quality packaging can be ensured / automatic programming / 10 program options / plus vacuum time
Other functions
The program can be stopped partially or completely at any time using the STOP button
There is a unique program in the control to maintain the vacuum pump / operating hour counter / service alarm program / standby mode, etc.
Options
Special pad for liquid packaging
Connector for vacuuming the external tray
Technical details
Chamber size (l/w/h): 460x420x180 mm
Machine size (l/w/h): 490x610x445 mm
Welding head length: 420 mm
Vacuum pump performance: 21 m3/h
Cycle time: 15-35 sec.
Machine weight: 67 kg
Performance: 0.75-1kW
230V-1-50 Hz
You can watch a video on using the machine HERE.
